- Thread starter
- #1
amszete
STRIKE FIRST|STRIKE HARD.
I figured I would post this information in case others could benefit from my experiences. It took me a while to get the connection I was looking for, so in case there are others out there that want to view content via a digital signal from a VGA port via your laptop, please read on and hope this helps...
So this year I told myself that I would invest in cabling, etc. so that I could hookup my laptop to my plasma tv and watch games. However, I wanted to connect to my 42'' Panasonic Plasma TV (model th-42px75u) so I could view games, youtubes, etc. using a HDMI connection, not just viewing content via an analog signal which is what my laptop produces through the lovely VGA port / graphics card in my IBM Laptop.
It took a while of evaluating devices / cables and several trips to Best Buy, but I finally settled on my setup. And I have to say after thinking of connect via S-Video and VGA cales, I am VERY glad I dod not go that way and I do love my signal. Pretty much whatever I see on my laptop is exactly what I see on my TV. Very nice.
What worked for me:
Since I was limited to only connecting via a VGA port from my laptop and I wanted to get a digital signal, I had to find a good device that could convert analog signals to digital. Many sites tell you that you can't do this or if you try you get a crappy signal - THEY ARE WRONG. It all depend on your device. After days of research I found that the best converter out there was the :
Aluratek VGA to HDMI Converter:
What is included, a VGA cable to send the analog signal from your laptop to the device. Also a male digital connection device (pictured) is also included which allows you to connect HDMI cables from the converter to your TV. What is not included is the HDMI cable.
After setting this up, I hard a tough time trying to my TV to regonize my laptop when I extended my windows to the extra monitor (i.e. TV) setting. Finally I realized that my laptop is not sending the right information probably because I didn't adjust/account for the resolution of where the signal is being sent to - my TV. Once I adjusted the resolution on my graphics card for the second monitor (where I was extending my windows to - TV), PERFECT. Now I am watching Youtubes full screen and all is well!!!
I was able to do all of this for under 100 bucks - which for what I am doing now on my TV is fine for me.
Hope this helps.
-Zete
So this year I told myself that I would invest in cabling, etc. so that I could hookup my laptop to my plasma tv and watch games. However, I wanted to connect to my 42'' Panasonic Plasma TV (model th-42px75u) so I could view games, youtubes, etc. using a HDMI connection, not just viewing content via an analog signal which is what my laptop produces through the lovely VGA port / graphics card in my IBM Laptop.
It took a while of evaluating devices / cables and several trips to Best Buy, but I finally settled on my setup. And I have to say after thinking of connect via S-Video and VGA cales, I am VERY glad I dod not go that way and I do love my signal. Pretty much whatever I see on my laptop is exactly what I see on my TV. Very nice.
What worked for me:
Since I was limited to only connecting via a VGA port from my laptop and I wanted to get a digital signal, I had to find a good device that could convert analog signals to digital. Many sites tell you that you can't do this or if you try you get a crappy signal - THEY ARE WRONG. It all depend on your device. After days of research I found that the best converter out there was the :
Aluratek VGA to HDMI Converter:
What is included, a VGA cable to send the analog signal from your laptop to the device. Also a male digital connection device (pictured) is also included which allows you to connect HDMI cables from the converter to your TV. What is not included is the HDMI cable.
After setting this up, I hard a tough time trying to my TV to regonize my laptop when I extended my windows to the extra monitor (i.e. TV) setting. Finally I realized that my laptop is not sending the right information probably because I didn't adjust/account for the resolution of where the signal is being sent to - my TV. Once I adjusted the resolution on my graphics card for the second monitor (where I was extending my windows to - TV), PERFECT. Now I am watching Youtubes full screen and all is well!!!
I was able to do all of this for under 100 bucks - which for what I am doing now on my TV is fine for me.
Hope this helps.
-Zete
Last edited by a moderator: